Tools / Fossil reconstruction

A fragment needs a little support.

Give a thin cortical surface a printable backing, including fragments curved in more than one direction. You choose the good bone to preserve and where the new material should grow.

Ready to try it?

Sign in to use your daily allowance. Files and results remain available for 24 hours.

View the source for the local workbench on GitHub.

What the tool can do

Preserve the core cortical surface, build a backing behind it and check the resulting mesh before export. Optional edge cleanup can alter a narrow band at the cut edge.

Mirrored skin

A smaller reflected copy faces outward on the opposite side. The two skins are joined around the border to make a solid sandwich.

Flat back

A smaller, smoothed outline closes on a flat plane behind the cortex. Try this when you want a simpler back surface for printing.

A smoother join

Bridge smoothing softens ridges from an irregular scan edge. Original edge allowance permits slight rounding at the perimeter while keeping the core cortex fixed.

From surface to solid

Four steps in the workbench

  1. Open your fragment

    Sign in, then open a triangular PLY, STL or OBJ surface. Choose its source units before loading. Use an open cortical surface cut from your scan; the tool does not separate bone from a complete scan.

  2. Choose the cortex and direction

    Rotate the fragment so you can see the good cortical surface. Click Choose cortical side, then click that surface. The arrow should point behind it, toward the new material. Use Reverse growth side if the arrow points the wrong way.

  3. Set the backing

    Start with Mirror sandwich. Choose Mirrored skin to make a smaller reflected copy, or Flat back for a smooth, planar back. A copy size of 90%, a 2 mm minimum skin gap and 1 mm bridge smoothing are useful starting settings; adjust them to your fragment.

  4. Build, inspect and download

    Click Build & check backing. Rotate the result to inspect the join. Download STL, PLY or the project bundle when the geometry checks pass, then review scale, thin areas, orientation and supports in your slicer. The Back button returns you to the website.

A few settings worth knowing

Copy size
90% makes the mirrored skin 10% smaller in each dimension. With Flat back, it scales the outline in its plane.
Minimum skin gap
The gap is measured along the arrow. A curved fragment can make the total part deeper than this value.
Bridge smoothing
Start at 1 mm to soften scan-edge ridges. A value of 0 restores a straight bridge.
Original edge allowance
The default 0.4 mm permits cleanup near the cut edge. Set it to 0 to keep every original triangle exact; some irregular edges may then need a different cut.
Other growth modes
Follow curve adds a backing along the surface’s local directions. Use arrow adds it along one chosen direction. Mirror sandwich is the starting mode for mirrored skins and flat backs.