◈
Fossil ForgeCORTICAL BACKING WORKBENCH
SURFACE → SOLID

Your surface. A new backing.

◈

A printable volume starts here

Open a fragment to inspect its surface
and build a backing behind the cortex.

Drag to rotate · Wheel to zoom · Right-drag to pan
Ready for a fragment

The original cortical surface and synthetic backing are displayed separately.

Fossil Forge / Quick guide

A backing behind the good bone.

Use a mirrored skin for a smaller outward-facing copy, or a flat back for a simpler printing surface. Bridge smoothing softens the join between the cortex and the generated backing.

  1. Open your fragment

    Sign in, then open a triangular PLY, STL or OBJ surface. Choose its source units before loading. Use an open cortical surface cut from your scan; the tool does not separate bone from a complete scan.

  2. Choose the cortex and direction

    Rotate the fragment so you can see the good cortical surface. Click Choose cortical side, then click that surface. The arrow should point behind it, toward the new material. Use Reverse growth side if the arrow points the wrong way.

  3. Set the backing

    Start with Mirror sandwich. Choose Mirrored skin to make a smaller reflected copy, or Flat back for a smooth, planar back. A copy size of 90%, a 2 mm minimum skin gap and 1 mm bridge smoothing are useful starting settings; adjust them to your fragment.

  4. Build, inspect and download

    Click Build & check backing. Rotate the result to inspect the join. Download STL, PLY or the project bundle when the geometry checks pass, then review scale, thin areas, orientation and supports in your slicer. The Back button returns you to the website.

Minimum skin gap is measured along the arrow, so total depth can be larger on a curved fragment. Original edge allowance permits slight rounding near the cut edge; the core cortical surface stays fixed.

Full instructions and settings ↗